Refreshing of BIOS FLASH memory - a cure for old computer that stops to boot?

[Wojciech Zabolotny]

Last week, my old (over 10 years!) but still good dual boot (Linux/Windows) Dell Vostro 3750 started to behave erratically.
The BIOS started and asked for the machine password, but after that the Grub didn't appear. The screen remained black. First the machine started every third power-on, but then it started only during the first power-up after a long switch-off period.
When started, the machine could work very long without any problems.
I suspected that the problem is associated with the temperature. Probably the BIOS FLASH memory cells lost the charge, and stopped to produce the correct data at higher temperature.
Finally I have decided to reflash the BIOS. After long cooling of the machine I managed to boot Windows and started the 3750A14.exe obtained from Dell as the still newest BIOS for my machine (the same was used for last 9 years).
The BIOS got reflashed with the "new" (in fact the same) BIOS. After reboot all the problems disappeared.
It looks like indeed the problem was caused by the FLASH gradually loosing information.
I post that in case if you experience the similar problems with old laptops (even from other vendors). Maybe refreshing of BIOS will solve also your problems? Maybe doing it every 5 years is siply a good practice?

[Bob Martin]

Post by Wojciech Zabolotny
Last week, my old (over 10 years!) but still good dual boot (Linux/Windows) Dell Vostro 3750 started to behave erratically.
The BIOS started and asked for the machine password, but after that the Grub didn't appear. The screen remained black. First the machine started every third power-on, but then it started only during the first power-up after a long switch-off period.
When started, the machine could work very long without any problems.
I suspected that the problem is associated with the temperature. Probably the BIOS FLASH memory cells lost the charge, and stopped to produce the correct data at higher temperature.
Finally I have decided to reflash the BIOS. After long cooling of the machine I managed to boot Windows and started the 3750A14.exe obtained from Dell as the still newest BIOS for my machine (the same was used for last 9 years).
The BIOS got reflashed with the "new" (in fact the same) BIOS. After reboot all the problems disappeared.
It looks like indeed the problem was caused by the FLASH gradually loosing information.
I post that in case if you experience the similar problems with old laptops (even from other vendors). Maybe refreshing of BIOS will solve also your problems? Maybe doing it every 5 years is siply a good practice?

Change the battery.

[Wojciech Zabolotny]

Post by Bob Martin

Post by Wojciech Zabolotny
Last week, my old (over 10 years!) but still good dual boot (Linux/Windows) Dell Vostro 3750 started to behave erratically.
The BIOS started and asked for the machine password, but after that the Grub didn't appear. The screen remained black. First the machine started every third power-on, but then it started only during the first power-up after a long switch-off period.
When started, the machine could work very long without any problems.
I suspected that the problem is associated with the temperature. Probably the BIOS FLASH memory cells lost the charge, and stopped to produce the correct data at higher temperature.
Finally I have decided to reflash the BIOS. After long cooling of the machine I managed to boot Windows and started the 3750A14.exe obtained from Dell as the still newest BIOS for my machine (the same was used for last 9 years).
The BIOS got reflashed with the "new" (in fact the same) BIOS. After reboot all the problems disappeared.
It looks like indeed the problem was caused by the FLASH gradually loosing information.
I post that in case if you experience the similar problems with old laptops (even from other vendors). Maybe refreshing of BIOS will solve also your problems? Maybe doing it every 5 years is siply a good practice?

Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original capacity.
The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help, but it did.

[Henrik Carlqvist]

Post by Wojciech Zabolotny

Post by Bob Martin
Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original
capacity. The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help, but it did.

The CMOS settings probably has a battery of its own:

https://www.ebay.com/itm/Pile-CMOS-rtc-bios-Battery-DELL-
Vostro-3750-/272713865926

regards Henrik

[Andrew]

Post by Henrik Carlqvist

Post by Wojciech Zabolotny

Post by Bob Martin
Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original
capacity. The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help, but it did.

https://www.ebay.com/itm/Pile-CMOS-rtc-bios-Battery-DELL-
Vostro-3750-/272713865926
regards Henrik

The symptoms were obvious but I was also not sure that a Laptop has a
CMOS battery, hopefully it is accessible enough that it can be replaced
easily.
I have replaced one in a Desktop PC from Acer and it was almost
impossible to access, the recommendation was to take it back to the
dealer but that turned out not to be necessary.

[David W. Hodgins]

Post by Andrew
The symptoms were obvious but I was also not sure that a Laptop has a
CMOS battery, hopefully it is accessible enough that it can be replaced
easily.
I have replaced one in a Desktop PC from Acer and it was almost
impossible to access, the recommendation was to take it back to the
dealer but that turned out not to be necessary.

They do, but getting at them is usually nearly impossible. I've even seen them
soldered in place. It's planned obsolescence.

Regards, Dave Hodgins

[Scott Alfter]

Post by Andrew

Post by Henrik Carlqvist

Post by Wojciech Zabolotny

Post by Bob Martin
Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original
capacity. The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help, but it did.

https://www.ebay.com/itm/Pile-CMOS-rtc-bios-Battery-DELL-
Vostro-3750-/272713865926

The symptoms were obvious but I was also not sure that a Laptop has a
CMOS battery, hopefully it is accessible enough that it can be replaced
easily.

It'll probably be buried somewhere...definitely not as easy to access as the
main battery, which just pops out.

Dell's service documentation is usually pretty decent and will show you what
needs to be removed to get at any part of your computer. Download the
appropriate manual (for this one, looks like it's the owner's manual) and
follow the instructions. I found an online-browsable version of the manual;
the steps described are listed here:

https://all-guidesbox.com/manual/1047680/dell-vostro-3750-owner-s-manual-147.html?page=111

(It appears to be just a plain old CR2032 that snaps into a holder, without
wires and a plug dangling from it. You should be able to find a local
replacement easily.)

_/_
/ v \ Scott Alfter (remove the obvious to send mail)
(IIGS( https://alfter.us/ Top-posting!
\_^_/ >What's the most annoying thing on Usenet?

[Wojciech Zabolotny]

Post by Andrew

Post by Henrik Carlqvist

Post by Wojciech Zabolotny

Post by Bob Martin
Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original
capacity. The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help, but it did.

https://www.ebay.com/itm/Pile-CMOS-rtc-bios-Battery-DELL-
Vostro-3750-/272713865926
regards Henrik

The symptoms were obvious but I was also not sure that a Laptop has a
CMOS battery, hopefully it is accessible enough that it can be replaced
easily.
I have replaced one in a Desktop PC from Acer and it was almost
impossible to access, the recommendation was to take it back to the
dealer but that turned out not to be necessary.

I have replaced the CMOS battery. The procedure was not trivial, but was
quite good documented in the Vostro 3750 owner's manual
https://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-3750_owner%27s%20manual_en-us.pdf
Many thanks to Dell for providing such a nice documentation.

Unfortunately, the problem with laptop not booting still returns.
The memory is working correctly, the disk also.

I have noticed that the problem is time-correlated with Windows updates.
I have found an interesting material about Windows trashing the GRUB-based
multiboot configuration:
https://www.windowsphoneinfo.com/threads/now-mswin-will-trash-your-grub-just-by-booting.314139/

Now the question is, how I can prevent it.
For sure I want an open-source bootloader as a main bootloader in my system.
In the worst case, I can deinstall Windows.

Regards,
Wojtek

[Wojciech Zabolotny]

Post by Wojciech Zabolotny

Post by Andrew

Post by Henrik Carlqvist

Post by Wojciech Zabolotny

Post by Bob Martin
Change the battery.

The laptop battery was replaced 3 years ago, and has 91% of the original
capacity. The BIOS does not loose settings.
If if it was the matter of battery, the reflashing itself wouldn't help,
but it did.

https://www.ebay.com/itm/Pile-CMOS-rtc-bios-Battery-DELL-
Vostro-3750-/272713865926
regards Henrik

The symptoms were obvious but I was also not sure that a Laptop has a
CMOS battery, hopefully it is accessible enough that it can be replaced
easily.
I have replaced one in a Desktop PC from Acer and it was almost
impossible to access, the recommendation was to take it back to the
dealer but that turned out not to be necessary.

I have replaced the CMOS battery. The procedure was not trivial, but was
quite good documented in the Vostro 3750 owner's manual
https://downloads.dell.com/manuals/all-products/esuprt_laptop/esuprt_vostro_notebook/vostro-3750_owner%27s%20manual_en-us.pdf
Many thanks to Dell for providing such a nice documentation.
Unfortunately, the problem with laptop not booting still returns.
The memory is working correctly, the disk also.
I have noticed that the problem is time-correlated with Windows updates.
I have found an interesting material about Windows trashing the GRUB-based
https://www.windowsphoneinfo.com/threads/now-mswin-will-trash-your-grub-just-by-booting.314139/
Now the question is, how I can prevent it.
For sure I want an open-source bootloader as a main bootloader in my system.
In the worst case, I can deinstall Windows.
Regards,
Wojtek

Yet another useful resource, how to protect multiboot machines against malicious Windows activity:
https://unix.stackexchange.com/questions/68581/how-can-i-prevent-windows-from-overwriting-grub-when-using-a-dual-boot-machine

Regards,
Wojtek

[Henrik Carlqvist]

Post by Wojciech Zabolotny
I have noticed that the problem is time-correlated with Windows updates.
I have found an interesting material about Windows trashing the
https://www.windowsphoneinfo.com/threads/now-mswin-will-trash-your-grub-

just-by-booting.314139/

Post by Wojciech Zabolotny
Now the question is, how I can prevent it.

The easiest way to prevent Windows from doing stupid stuff with your
hardware is to avoid booting Windows on your hardware. Instead of dual
boot, you can boot Windows in a virtual environment like qemu or
virtualbox. On the other hand, if you really want to give Windows access
to your hardware (like the graphics card if you need gaming performance
in Windows), you can instead boot Linux in a virtual environment and hope
that future Windows upgrades will not mess upp your virtual installations.

regards Henrik

[Peter 'Shaggy' Haywood]

Groovy hepcat Henrik Carlqvist was jivin' in comp.os.linux.hardware on
Tue, 1 Jun 2021 03:29 pm. It's a cool scene! Dig it.

Post by Wojciech Zabolotny

Post by Wojciech Zabolotny
I have noticed that the problem is time-correlated with Windows
updates. I have found an interesting material about Windows trashing

https://www.windowsphoneinfo.com/threads/now-mswin-will-trash-your-grub-

Post by Wojciech Zabolotny
just-by-booting.314139/

Post by Wojciech Zabolotny
Now the question is, how I can prevent it.

The easiest way to prevent Windows from doing stupid stuff with your
hardware is to avoid booting Windows on your hardware. Instead of dual
boot, you can boot Windows in a virtual environment like qemu or
virtualbox. On the other hand, if you really want to give Windows
access to your hardware (like the graphics card if you need gaming
performance in Windows), you can instead boot Linux in a virtual
environment and hope that future Windows upgrades will not mess upp
your virtual installations.

Another solution, which is the one I use, is to put Wind-oh!-s on a
second hard drive. Grub can remap the order of the drives so that you
can boot that dud system... if you really must. That way, if Losedows
messes with the MBR, it'll be messing with the MBR of the second drive,
leaving your grub installation alone on the first.

[Andrew]

Post by Wojciech Zabolotny

Post by Wojciech Zabolotny
I have noticed that the problem is time-correlated with Windows updates.
I have found an interesting material about Windows trashing the
https://www.windowsphoneinfo.com/threads/now-mswin-will-trash-your-grub-

just-by-booting.314139/

Post by Wojciech Zabolotny
Now the question is, how I can prevent it.

The easiest way to prevent Windows from doing stupid stuff with your
hardware is to avoid booting Windows on your hardware. Instead of dual
boot, you can boot Windows in a virtual environment like qemu or
virtualbox. On the other hand, if you really want to give Windows access
to your hardware (like the graphics card if you need gaming performance
in Windows), you can instead boot Linux in a virtual environment and hope
that future Windows upgrades will not mess upp your virtual installations.
regards Henrik

I have two dual-boot systems - one EFI and one "traditional Bios" - and
neither has that problem. Where one of them did have a problem was when
Windows changed the partition-id on (at least) one of its own partitions
and Linux refused to boot up properly because it could mount the
partition(s). Is that what the "nofail" option is for?